How do I assemble the Styku X2L scanning tower?

Overview

The scanning tower ships with a separate base that must be attached before setup. You will need the hex tool and screws included in the box.

Steps

1. Remove the tower base, hex tool, and screws from the box.
2. Carefully remove the scanning tower from its shipping package. Set it down gently to avoid scratching it.
3. Attach the tower base to the bottom of the scanning tower using the provided screws and hex tool.

Notes

• Do not discard the hex tool — keep it with your setup guide in case you need to disassemble or move the scanner in the future.
• Take care when setting the tower down on hard floors, as the camera housing can be scratched or damaged.

If the problem persists, contact support and include: a description of the issue (e.g., missing screws, stripped hex socket).

Applies to: Styku X2L